The option of a common driveline or servo drive. Modular design allows for easy expansion. This press features three distinct tension zones; an electronically driven nip roller with closed-loop feedback maintains precise tension within the process zone. Load cells coupled with a pneumantic brake control the unwind tension. Telstar designs and manufactures highly veratile converting machings to custom specifications. |
| |
|
Medical Grade Die Stations
 Constructed of 1" thick steel side frames featuring an integrated gear-driven, in-feed nip roller. Twin air cylinders provide even down force on the natural urethane covered nip roller. Adjustable stop blocks allow setting a nip gap for processing delicate materials.
|
|
Rotary Hot Stamp Die Sation
Telstar Die Station added to a Gallus EM280 integrates Telstar's Unwind / Rewind for hot stamp foil |
|
| |
Rotary Hot Stamp Die Station
 Hot stamp unit designed for the Mark Andy rail platform. Servo Driven auto registration and re-registration programs available.
|
|
In-Line Die Cutting Module
 Telstar provides full design engineering and integration to any press make or model. Splitting the drive train and adding additional converting sections is accomplished with professional quality and results.
|
|
| |
|
Interprint Servo Driven Die Cutting
 This complete die cutting station can be mounted between Pring stations allowing for interpring die cutting. Ideally suited for coupon production and multilayered applications.
|
|
Off-Line Die Cutters
 This portable die cutting press is fully equipped with a product unwind, waste rewind and a conveyor. Runs pre-printed products and re-registers via Telstar's exclusive Servo Genius program..
|
|
| |
|
 |
Portable Interprint Die Station
Specifically designed for the
Comco MSP press. This die station mounts between any two print stations and the web travels to
and from the Telstar die station without sacrificing a print station. Unit is equipped
with a docking base that
rests on the floor between any two print stations. |
|
|
| |
|
Telstar Designed to Laminate &Rre-Register Rotary Die-Cutting on Pre-Printed Products.
 The auto register on this rotary die-cutter is so finely tuned that the machine can start and stop without loosing register. This precision makes it possible to process sequentially numbered products without loosing the sequence. Linered or self-wound laminates can be applied to the pre-printed web. After matrix stripping, the finished product can either be rewound or sheeted. The rotary sheeter is also controlled with auto-register.
Other machine features include a splice table, lateral die adjustment, and die pressure monitor. A safetly light curtain allows access to the control console, but prevents reaching into the process zone. The built-in die hoist makes changing tools safe and easy.
|
|
| |
|
The Mark Andy 4120-16" Press Re-Configured as a Custom Converting Press
 The machine sequence is altered to allow a secondary rewind to be positioned between the unwind and die station. A pre-printed pressure sensitive web was introduced from the standard unwind, with the liner being rewond, the PS is then laminated to a absorbent pad material. The rotary die station was upgraded with Telstar's independent servo drive and auto register system. The cut pads were drawn from the die and shingled on an eight-foot long variable speed conveyor.
|
|
| |
|
| Wide-Web Retrofits |
| |
 |
|
| |
|
| Tell us about your requirements. Telstar designs and manufactures custom solutions that will improve your bottom line. |
| |
|
 |
|
Contact